• 家庭影院器材 家庭影院 录音棚装修 智能装修整合设计

  • 24小时咨询热线

    400-088-0521
  • SDP-5 DIGITAL SURROUND PROCESSOR解码器

    http://www.hifi.com.cn/ 来源:索兰影音 2012-07-16 22:39:13 关键词:SDP-5 DIGITAL SURROUND

     

     

     

     

     

     

    Audio Input & Output Connectors

     

     

    Analog Audio Inputs

     

     

    8 Stereo (RCA) or 5 stereo and one 5.1-channel or 2 stereo and two 5.1-channel connectors

     

     

    Digital Audio Inputs

     

     

    • 4 S/PDIF coaxial (RCA) and 4 S/PDIF optical (TosLink) connectors
    • Coaxial and optical input connectors conform to IEC-958, S/PDIF standards
    • Accepts 44.1, 48, 88.2 and 96kHz sample rates
    • Accepts 16–24 bits PCM audio, Dolby® Digital, DTS® and DTS-ES® discrete data formats

     

     

    Main Zone Audio Outputs

     

     

    8 Unbalanced (RCA) connectors for Front L/R, Center, Subwoofer, Side L/R and Rear L/R

     

     

    Zone 2 Audio Outputs

     

     

    • 1 Unbalanced (RCA, variable output level) stereo connector
    • 1 S/PDIF coaxial (RCA) connector

     

     

     

     

     

    Main Zone Audio Performance

     

     

    A/D Conversion

     

     

    24-Bit, 96kHz, dual-bit ΔΣ architecture

     

     

    D/A Conversion

     

     

    24-Bit, 44.1 to 192kHz, multi-bit ΔΣ architecture

     

     

    Frequency Response

     

     

    10Hz to 20kHz, +0.05dB/–0.1dB, –0.5dB at 40kHz, reference 1kHz

     

     

    THD + Noise

     

     

    Below 0.008% at 1kHz, maximum output level

     

     

    Dynamic Range

     

     

    108dB Minimum, 22kHz bandwidth

     

     

    Signal-to-Noise Ratio

     

     

    108dB Minimum, 22kHz bandwidth

     

     

    Input Sensitivity

     

     

    200mVrms (2Vrms for maximum output level) at 0dB input gain

     

     

    Input Impedance

     

     

    100kΩ in parallel with 150pF

     

     

    Output Level

     

     

    • 150mVrms typical, 6Vrms maximum (RCA connectors)
    • Maximum value with full-scale input signal and volume at +6dB

     

     

    Output Impedance

     

     


    • 100Ω in parallel with 150pF (RCA connectors)
    • 50Ω in parallel with 150pF (XLR connectors)

     

     

     

     

     

    Zone 2 Audio Performance

     

     

    D/A Conversion

     

     

    24-Bit, 44.1 to 192kHz, multi-bit ΔΣ architecture

     

     

    Frequency Response

     

     

    10Hz to 20kHz, +0.1dB/–0.25dB, –0.75dB at 40kHz, reference 1kHz

     

     

    THD + Noise

     

     

    Below 0.005% at 1kHz, maximum output level

     

     

    Dynamic Range

     

     

    103dB Minimum, 22kHz bandwidth

     

     

    Signal-to-Noise Ratio

     

     

    103dB Minimum, 22kHz bandwidth

     

     

    Input Sensitivity

     

     

    200mVrms (4Vrms for maximum output level)

     

     

    Input Impedance

     

     

    100kΩ in parallel with 150pF

     

     

    Output Level

     

     

    • 200mVrms Typical, 4Vrms maximum (RCA connectors)
    • Maximum value with full-scale input signal and volume at 0dB

     

     

    Output Impedance

     

     

    100Ω in parallel with 150pF (RCA connectors)

     

     

     

     

     

    Video Input & Output Connectors

     

     

    Video Inputs

     

     

    5 Composite (RCA), 5 S-video and 3 component video (RCA)

     

     

    Video Outputs

     

     

    2 Composite (RCA, 1 monitor and 1 Zone 2), 2 S-video (1 monitor and 1 Zone 2) and 1 component (RCA)

     

     

     

     

     

    Composite & S-video Performance

     

     

    Compatibility

     

     

    NTSC, PAL and SECAM

     

     

    Switching

     

     

    Active

     

     

    Output Level

     

     

    1.0V Peak-to-peak

     

     

    Impedance

     

     

    75Ω

     

     

    Input Return Loss

     

     

    >40dB

     

     

    Differential Gain

     

     

    <0.5%

     

     

    Differential Phase

     

     

    <0.5°

     

     

    Bandwidth

     

     

    >25MHz

     

     

    K Factor

     

     

    <0.3%

     

     

    Gain

     

     

    ±0.15dB

     

     

    Signal-to-Noise Ratio

     

     

    >65dB

     

     

    Frequency Response

     

     

    10Hz to 10MHz, +0.1/–0.3dB

     

     

     

     

     

    Component Video Performance

     

     

    Compatibility

     

     

    3-Channel (Y, Pr, Pb), format-independent

     

     

    Switching

     

     

    Passive

     

     

    Impedance

     

     

    75Ω

     

     

    Insertion Loss

     

     

    <3dB

     

     

    Bandwidth

     

     

    >150MHz

     

     

     

     

     

    General

     

     

    Trigger Outputs

     

     

    1 Power on/off and 1 programmable connector on detachable screw terminals (+12VDC, 0.5 amps each)

     

     

    RS-232 Serial Input/Output

     

     

    2 9-Pin D-sub connectors

     

     

    Power Requirement

     

     

    90–250VAC, 50–60Hz, 60W (universal line input), detachable power cord

     

     

    Unit Dimensions

     

     

    • Height (with feet): 5.04 inches (128mm)
    • Width: 17.3 inches (440mm)
    • Depth: 14.85 inches (377mm)

     

     

    Unit Weight

     

     

    24 lb (10.7kg)

     

     

    Rack Mounting

     

     

    Brackets are provided for installation in a standard 19-inch equipment rack (3 rack units required)

     

     

    Environment

     

     

    • Operating Temperature: 0° to 35°C (32° to 95°F)
    • Storage Temperature: –30° to 75°C (–22° to 167°F)
    • Relative Humidity: 95% maximum without condensation

     

     

    Remote Control

     

     

    • Hand-held, backlit infrared remote control unit
    • Requires 2 AA batteries (Alkaline batteries recommended)